BDE/BGE SERIES

Affordable and durable describes BRAWN’S epoxy-coated mixers. Motor selections are similar to the Steel-It® line with output speeds as high as 3500 RPM and as low as 175 RPM. The epoxy-coated products meet many industrial needs for a sanitary finish. The metal housings on this product can be either aluminum or steel, depending on the application requirements. These modular design direct or gear models can be optionally equipped with mechanical seals, just like the other sanitary lines.

• Modular design for better match of mixer to specific application, plus optional field interchangeability between direct drive and gear drive.

• All metal housings — high strength aluminum or optional stainless steel housing and motors

• Flexible output coupling isolates drive from shock loads

• Lifetime lubrication of gear drives

• Permanently sealed bearings prevent process contamination

• Full range of output speeds to tackle your specific mixing process

• Standard NEMA C-Face motors assure readily availability of replacement motors

• Energy saving, AC electric C motors with either 115/208-230V single phase or 208-230/460 V, 60Hz or 190/380 V, 50 Hz, 3 phase, with 1.15 service factor are standards. DC electric and air motors are also available

• BRAWN Guarantee of Performance